How to Determine a Part Description

1.) Verify your Pin Count, then your Lead Pitch.
2.) Find the specifications that meet your requirements.
3.) View the PDF for an engineering drawing or have it faxed to you.
4.) Click on the description to view pricing, delivery status, or place your order.

SPECIFICATIONS (mm):

• Available in .40, .50, .65, .80 and 1.00 mm pitches
• Custom pitches down to .30 mm
• Lidded and Open Top Sockets for 3 mm - 10 mm packages
• Lidded Sockets for 10 - 16 mm packages
• Center ground pin standard for all sockets
• Optional copper heat slug available for high wattage devices
• Sockets for over 80 different JEDEC standard footprints

MECHANICAL PROPERTIES:

• Mounting Method to Board: Thru-hole Mount
• Socket Operation: Clamshell lid; ZIF Open Top
• Operating Temperature: -50° C to +150° C
• Contact Force: 30 +/- 5 gf
• Life Cycles: 5,000 Mechanical Cycles

PHYSICAL PROPERTIES:

• Plastic Body: PPS
• Contact Base Metal: BeCu
• Contact Plating: Au over Ni; NiB optional
• Center Pin Base Metal Brass; Cu optional
• Center Pin Plating: Au; NiB optional
• Springs, Torsion / Coil: Passivated S.S.

ELECTRICAL PROPERTIES:

• Contact Resistance: < 50 mOhms
• Inductance: 3 nH
• Current Rating: .5A with 30°C rise, 1.0A with 75°C rise
• Volume Resistivity: 1 x 1015 Ohm-cm
• Insulation Resistance: 560 V/mil

TEST REPORTS

• Capacitance
• Inductance

Clam Shell
S-MLF-00-028-A

Open-Top

S-MLF-00-028-A1
SKT1902

S-MLF-00-016-B*
*NOTE:Used with Package Thickness of 0.7mm to 1.00mm