|
 |
|
OSCILLATOR PRODUCTS
Half-Can DIP to SMB Converter
Emulation Technology offers the AB004DIP.3SMB1 for use in converting a half-can DIP footprint to a female 50W SMB connector. This high quality converter allows the engineer to easily connect a signal generator to the system for development or debug. Any off-the-shelf male 50W SMB cable can be used with this adapter. The AB004DIP.3SMB1 does not provide any provisions for terminating the signal source; this termination should be provided by the system. The AB004DIP.3SMB1 is constructed on a compact two-layer FR4 PCB and uses high quality SMB and pin connectors.
Features & Benefits
- Allows a signal generator to be used in place of a standard half-can oscillator
- Convenient and cost effective way to attach an SMB cable to a PCB with a half-can DIP footprint
- Allows the system designer to efficiently develop and debug the system without the need to specify the oscillator
- Separates the system from the oscillator, making for simpler debugging
- Allows for fine tuning of the optimal reference frequency.
- Uses standard male 50W SMB cables
- Ideal for lab environments
- Pin 1 designator on PCB
Pin Function
|
|
 Enlarge
AB004DIP.3SMB1
|
| |
|
|
Enlarge