DESIGNING SOLUTIONS CONNECTING TECHNOLOGY DELIVERING RESULTS

View Cart
OSCILLATORS
Home > Products > Oscillators
0  

OSCILLATOR PRODUCTS

Half-Can DIP to SMA Converter

Emulation Technology offers the AB004DIP.3SMA1 for use in converting a half-can DIP footprint to a 3.5mm female 50W SMA connector. This high quality converter allows the engineer to easily connect a signal generator to the system for development or debug. Any off-the-shelf 3.5mm male 50W SMA cable can be used with this adapter. The AB004DIP.3SMA1 does not provide any provisions for terminating the signal source; this termination should be provided by the system. The AB004DIP.3SMA1 is constructed on a compact two-layer FR4 PCB and uses high quality SMA and pin connectors.

Features & Benefits

  • Allows a signal generator to be used in place of a standard half-can oscillator
  • Convenient and cost effective way to attach an SMA cable to a PCB with a half-can DIP footprint
  • Allows the system designer to efficiently develop and debug the system without the need to specify the oscillator
  • Separates the system from the oscillator, making for simpler debugging
  • Allows for fine tuning of the optimal reference frequency
  • Uses standard 3.5mm male 50W SMA cables
  • Ideal for lab environments
  • Pin 1 designator on PCB

Pin Functions

Pin Number Function
1 NC
4 GND
5 Signal
8 NC

Ordering Information

Item Drawing
AB004DIP.3SMA1 F7691

 


Enlarge

AB004DIP.3SMA1